Foley Sound

Foley sound is used to add sound effects to a scene. Either the sound was not picked up good enough on location or was not picked up at all. You can add sound from a library but that might not sound as authentic as you need. Not all sound effects found in the library are the exact sound you look for or last the desired duration.

If that is the case then you can record sounds in sync with the actions on the screen. You can run the video on a large movie screen of a TV on a loop or playing straight through the scene.

The above video is almost 20 minutes long and well worth the watch. It is one of the most comprehensive, and entertaining overview of what a Foley artist does and what a sound studio looks like. Hot Nerd Girl is not the best interviewer one could hope for, but Universal Studios Foley artist Dean Minnerly makes the interview work and has some good insight about Foley sound. You can skip from about 5:43 to about 14:16 for the more interesting Q&A of the video. Not only does he show some sound recreation, but also has a truly in-depth knowledge of the industry. Most other videos are just people making sound effects.

  

In the below video you can see the application of Foley artistry. Gary Hecker is the star in this more entertaining video he shows you why Foley is an art. He doesn’t just rattle a horse bridle randomly, he does it in conjunction with what he sees on screen. Camera perspective is all too important when recording sound effects; as the horse gets farther, rattle quieter.

When doing Foley you really have to be aware what is happening on screen, what might happen next, and use your imagination. The more creative you are to get an authentic sounding track, the more you can trick the audience into believing it is authentic and belongs in the scene therefore drawing them into the story subconsciously.

How To Hide A Lav Mic

When using a lavalier mic on film shoots, you probably don’t want them visible by the cameras. In interviews, and on broadcast news shows it is tolerable because it is known that they are miked. In film though, it can take you out of the scene and is not part of the setting or wardrobe and does not help tell the story.

So when you want to use a lav to supplement the shotgun audio there are many issues that can occur such as visibility, clothing rustling against the mic, and talent’s comfort level. There are many ways to approach these issues.

To keep the mic invisible hide it either under the shirt of the actor, under the collar if they have a collared shirt, or running up the back of their shirt and under their hair provided their hair is long enough.

Tackling clothing rustling and talent’s comfort level can be one in the same. In order to combat rustling, use mole skin around the mic and the that to the talent’s wardrobe or skin. Do not be awkard or uncomfortable when miking an actor, but don’t be too comfortable either. Just because you have done this hundreds of times with actors who have also done this hundreds of times, doesn’t mean everyone is used to getting their clothes ripped off just to put a mic on. It helps to get the actor’s name and tell them yours and be professional. If you find out they have shot with a lav before and it is not their first production then maybe you both can move on to getting the mic on and shooting the scene.

Lav Snake by Remote Audio

Every production has a different set of wardrobe that the actors may wear. From dresses to suits to t-shirts to armor, there are many ways to place a lav mic. However, what if the actor is wearing extremely tight fitting clothing and you have to run the lav cable down to an ankle pack, and fast?

Not a problem for the Lav Snake from Remote Audio. The Lav Snake is a 4-foot wire with a rounded tip on one end and lav mic connector holder at the other end. It is flexible but stiff enough for even the tightest clothing, light-weight, and coils up small enough to fit into your pocket or provided pouch.

Simply run the red tip down the talent’s shirt, pants, or unitard until you see the red tip on the other end of the clothing. Attach the lav connector to the Lav Snake by Remote Audio, pull the red tip to feed the rest of the Lav Snake and mic cable through the item of clothing until the lav connector pops out on the other side. Attach lav connector to body pack and you are ready to roll sound.

Benefits for the Lav Snake by Remote Audio:

• Works in clothing too tight for traditional lav weights
• Highly polished for low drag
• Rolls compact for storage but always straightens for use
• Safe for clothing too delicate for the traditional rigid stick tool
• Easy to carry in your pocket or ENG audio bag
• Bright red tip for high visibility, polished smooth for easy routing
• Rounded connector back is easy on actor’s skin and won’t scratch
• Compact zippered carry pouch

Priced at around $60, it is worth every penny. Just ask any actor you are awkwardly laving up without the Lav Snake next time you are on a shoot.

Headphone Comparison

In the above video, SonicSenseProAudio Reviews three of the top headphones under $100. There are varying frequency ranges/responses and sounds that each pair has, and which one is right for you, your production, and your application is purely subjective.

When doing location or post sound, recordists and engineers may look for fidelity in their headphones to hear what is closest to the actual sound with no audio coloration. The following are three options that audio crews may look at purchasing if on a budget.

Audio-Technica A TH-M40x:

Driver	1.5" (40 mm)
Magnet	Neodymium
Voice Coil	CCAW (copper-clad aluminum wire)
Frequency Response	15 Hz to 24 kHz
Maximum Input Power	1600 mW @ 1 kHz
Sensitivity	98 dB
Impedance	35 Ω
Weight	8.5 oz (240 g) without cable

Sony MDR-7506:

Type	Circumaural, closed-back
Frequency Range	10 Hz - 20 kHz
Impedance	63 Ohms
Sensitivity	104dB SPL/mW
Maximum Input Power	1000 mW
Connectors	1/8" stereo mini-jack, with 1/8" to 1/4" TRS phono adapter
Cable Length	10' (3 m)
Weight	7.8 oz (221 g)

Sennheiser HD 280:

Type	Circumaural, closed-back
Frequency Range	8Hz - 25kHz
Impedance	64 Ohms
Sensitivity	102dB SPL/mW
Maximum Input Power	500mW
Connectors	3.5mm stereo mini plug with screw-type 1/4" adapter
Cable Length	10' (3 m) (coiled)
Weight	7.8 oz (220g) (without cable)

Specs are only part of the picture, they are a good guide, but ultimately it is what your ears hear and what it likes or is true to the natural sound of the source that is what is most important. There are less expensive headphones (not recommended), there are more expensive headphones that offer durability, wireless options, and greater attenuation of external sources, but for around $100, any of these three pairs of headphones should do the trick.